Film Model : SCL4, CH335E & SRP50

SCL4 can provide extra protection on glasses to prevent glass shattering risk when the glass break. CH335E and SRP50 can greatly reduce the sun heat, lower down the glare light and filter 99% of the harmful UV.

Film Model : DR15

The concourse is facing both east and west which expose to sun heat and glare all day long. Sunlight is too bright which bring un-comfort to passengers and station officer. DR15 was installed to reject up to 71% of the Total Solar Energy and reduce 81% of the glare light.

Film Model : AVS70

Located on the top floor of the hotel, the high ceiling curtain wall glasses allow large amount of natural light coming into the hotel but at the same time, sun heat is also severe which turn the function room like a green house. Solar Control Film AVS70 was installed to improve the situation. 53% of the total solar energy are being rejected but at the same time allow maximum amount of natural light coming in. 99% Harmful UV are also rejected to prevent carpet and interior furnishing from premature color fading.

Film Used : LLUMAR AIR80BL

EMSD, HKSAR would like to install solar control film in order to reduce the amount of air-conditioning charge within the building. They don’t want the traditional dark color window film as they don’t want the increase the extra cost of electricity on the lighting. As such, a high performance with visible light transmittance film LLUMAR AIR80BL was installed to whole block of the building for faces facing East and West.

Film Used : SHE7 (exterior) Safety & Security Film

In order to protect the building from windstorm damage and protest violence attack, LLUMAR SHE7 exterior safety & security film was selected by Architectural Services Department to install in whole block of building. Totally clear appearance of the film ensure original visual and light transmittance.

Film Used : SCL4

Tempered Glass although is much more safer than the traditional anneal glass but tempered glass also have a problem on spontaneous breaking due to the presence of impurity “Nickel Sulfide” in the manufacturing process. LLUMAR SCL4 was selected to install on all the partition glasses within the whole block of library in order to reduce the glass shattering risk when the glass break.

Specially designed for exterior application to resist harsh outdoors environment, its ultra low reflectivity enhance the exterior appearance of a building without interference to neighboring buildings.

This protection film is specially designed to most acrylic, PMMA and PC (polycarbonate) surfaces, with strong scratch resistant coating design for indoor and outdoor use.